All the pictures on the left can be clicked for a larger version.
|
|
Use masking tape or duct tape to mask off a center line. Use the receiver and the end of the barrel to make sure it is centered. |
 |
Using a very sharp X-Acto knife, mark off the centerline or use the Dremel as shown in the next frame. |
|
|
I used the Dremel to mark centerline positions every 3/8". |
 |
Center drill the centerline marks with a 1/16" bit |
 |
Drill
all
of
the
1/16"
holes
with
a
!/4"
bit.
Join
the
edges
of
all
of
the
holes
with
the
abrasive
wheel.
(Sorry,
the
pictures
didn't
turn
out). |
Under
Construction
